EXTRA PACK Hard Rock Liner, 2C textured paint, black satin gloss - removable set

The set includes:

• 2,5 liters BASECOAT FOR 2C TEXTURED PAINT
• 2 liters HARD ROCK LINER, 2C TEXTURED PAINT
• 0,5 liter HARDENER FOR 2C TEXTURED PAINT
• a HARD ROCK LINER SPRAY GUN + EMPTY BOTTLE

Application:

• Dismantle all car parts that can be easily removed. Mask all surfaces that are not to be coated. Mask rubber seals with FOLIATEC.com Easy Up Tape (item no. 79920). You should also protect wheel housings and the car underbody from spray mist.
• Clean and dry the surface to be sprayed, including edges, then degrease using FOLIATEC.com Carbody Spray Film pre-cleaner (item no. 79934). After cleaning, remove the remaining dust with a duster.
• Applying the basecoat with the FOLIATEC.com DIY Spray System:
• Apply the Basecoat in 2 generous layers. Work at a medium pace at level 2 and set the quantity control on the spray pistol grip to level III or IIII.
• Application with the spray gun:
• Apply the Basecoat in 2 generous layers at a medium pace. Use a 2.0mm spray nozzle with 2 - 3 bar pressure in a suitable spray booth.
• Flash off for 90 minutes after the first spray coating.
  Note: It can be coated with Hard Rock Liner once completely dry (after 4 - 5 hours at 20°C depending upon the thickness of the layers).
  Preparation of the Hard Rock Liner:
  Stir hardener well into the Hard Rock Liner for approx. 2 minutes. Fill the Spray Gun bottle, push in the cap, break the seal and screw the Spray Gun onto the bottle.
• Applying the Hard Rock Liner with the FOLIATEC Hard Rock Liner Spray Gun:
  Apply the Hard Rock Liner with a slow pace and 3 - 4 bar pressure until a coverage of approx. 50% is reached. After about 2 hours, a second layer for 100% coverage has to be applied. Adjustment of the structure takes place in a third layer. The structure is adjusted in the third layer from coarse to fine by adjusting the pressure from 4 to 6 bar and changing the spraying distance.

Note: After 2 hours, the Hard Rock Liner is dust dry and must be allowed to continue drying for around 24 hours at a constant temperature.

For detailed information, check the instruction manual!