SZAKÉRTŐI TANÁCSADÁS
9-től 17 óráig
Nincsenek termékek
*316 202
Set of intake manifold caps for Audi/Seat/Skoda/Volkswagen 2.0 TDI CR engines
Új termék
16.010 Ft áfával1
Set of intake manifold caps for VAG 2.0 TDI CR with plastic manifold (no gasket)
Set of intake manifold caps for Audi/Seat/Skoda/Volkswagen 2.0 TDI CR engines
Küldje el kérését vagy kérdését
* Kötelezõ mezõ
vagy Törölni
Set of intake manifold caps for VAG 2.0 TDI CR with plastic manifold (no gasket)
Amennyiben szeretne e-mailben értesítést kapni, kérjük, töltse ki az űrlapot .
* Kötelezõ mezõ
vagy Törölni
RS-FLP_DEL015
Set of intake manifold caps for Audi/Seat/Skoda/Volkswagen 2.0 TDI CR engines
The set enabling the disassembly of swirl flaps in 2.0 TDI CR engines consists of a limiter for the extreme position of the adjuster and plugs made of the same material as the original swirl flaps and the intake manifold, additionally reinforced with glass fiber (PA66 GF35).
Swirl flaps are elements used in diesel engines whose main task is to introduce turbulence in the air flow into the combustion chamber in order to increase combustion efficiency. Unfortunately, these flip-flops have many disadvantages such as:
Application:
VAG (VW, Audi, Seat, Skoda) 2.0 TDI CR engines with plastic manifold no. 03L129711AG, produced in 2008-2014:
2.0 CAAB, 102 HP
2.0 CAGA, 143 HP
2.0 CAGB, 136 HP
2.0 CAGC, 120 HP
2.0 CAHA, 170 HP
2.0 CAHB, 163 HP
2.0 CBAA, 136 HP
2.0 CBAB, 140 HP
2.0 CBAC, 143 HP
2.0 CBBB, 170 HP
2.0 CBDA, 136 HP
2.0 CBDB, 140 HP
2.0 CBDC, 110 HP
2.0 CEGA, 170 HP
2.0 CJAA, 140 HP
2.0 CMEA, 143 HP
After installing the caps, use the adjuster limiter, which is included in the kit, to avoid displaying the error on the dashboard.
It should be possible to remove the following error codes with this repair kit:
P1018, 012597, P3135, P2008, P2011, 004120
The mentioned error codes are related to problems in the operation of the swirl flaps or their position sensors, which may lead to various irregularities, such as burning of the actuator motor or oil leak.
P2008 and P2011 refer to jammed swirl flaps in bank 1 or 2, and code 004120 indicates a problem with swirl flaps in bank 2. P1018 refers to an incorrect signal from the swirl flap position sensor in bank 1, while code 012597 indicates abnormalities in engine operation, which may be caused by, among others, jamming of the swirl flaps.
The P3135 code also concerns the swirl flap position sensor, which has not reached the required point, which can lead to various engine problems.
Set includes:
Technical specifications:
Plugs made of PA66 GF35, the same material as the intake collector and swirl flaps.
Perfect repeatability of dimensions.
The original design of the caps makes it impossible to turn the flaps or suck them into the combustion chamber.
anyag | Műanyag;alumínium |
Ez a fórum a vásárlók közötti információcserét szolgálja. Rendelési információkkal, a termékek elérhetőségével és a reklamációkkal kapcsolatban, kérjük vegye fel a kapcsolatot ügyfélszolgálatunkkal!
Set of intake manifold caps for...