SZAKÉRTŐI TANÁCSADÁS
9-től 17 óráig
Nincsenek termékek
*282 027
With their internal diameter of 12 mm, the AEM injection rails are particularly suitable for heavy tuning. They are equipped with a 1/8" NPT port, allowing the installation of a fuel pressure gauge (or an additional injection, like NOS).
Új termék
65.500 Ft áfával1
AEM High Volume Fuel Rail for Honda F22A, H22, H23
With their internal diameter of 12 mm, the AEM injection rails are particularly suitable for heavy tuning. They are equipped with a 1/8" NPT port, allowing the installation of a fuel pressure gauge (or an additional injection, like NOS).
Küldje el kérését vagy kérdését
* Kötelezõ mezõ
vagy Törölni
AEM High Volume Fuel Rail for Honda F22A, H22, H23
Amennyiben szeretne e-mailben értesítést kapni, kérjük, töltse ki az űrlapot .
* Kötelezõ mezõ
vagy Törölni
AEM-25-104BK
With their internal diameter of 12 mm, the AEM injection rails are particularly suitable for heavy tuning. They are equipped with a 1/8" NPT port, allowing the installation of a fuel pressure gauge (or an additional injection, like NOS).
Specifications:
Made in the United States, the AEM injection rails are made entirely of forged aluminum and are installed in place of the existing ones, thanks to the fitting accessories supplied. With their 9/16"x18 threaded inlet and outlet, they can also be used with a custom Dash 6 fuel circuit.
Their large diameter also guarantees a large fuel capacity, making it possible to dampen the pulsations and back pressure generated by large injectors. Each rail is delivered with its instructions for use, its O-rings for the injectors, and all the mounting accessories (screws, brackets, etc.).
márka | Honda |
Ez a fórum a vásárlók közötti információcserét szolgálja. Rendelési információkkal, a termékek elérhetőségével és a reklamációkkal kapcsolatban, kérjük vegye fel a kapcsolatot ügyfélszolgálatunkkal!
With their internal diameter of 12...